Shower Seals
Quickly find what you’re looking for – just use the filters.
Shower Seal PVC Replacement Seal Shower Bathroom TYP-18 200cm Glass Thickness 10mm
Shower seal PVC replacement seal TYP-18 for 10 mm glass thickness With this cut-to-length option you can choose the desired length and quantity and add it directly to the shopping cart. This saves you from sawing yourself and gives you a shower seal you can process immediately and install precisely. The shower seal PVC replacement seal TYP-18 is designed for 10 mm glass thickness and provides reliable sealing in the bathroom. ✅ Your advantages at a glance You receive a practical cut-to-length item that you can order directly in the required length and quantity. The seal is designed for 10 mm glass thickness and is ideal for compatible shower enclosures. The combination of rigid PVC and a soft sealing area supports stable installation and a clean seal. The additional drip nose helps to channel water away and reduce splashing. By processing it directly you save sawing work and avoid unnecessary waste. With a 200 cm length, the profile can be flexibly adapted to your installation situation. The replacement seal is a functional solution for replacing worn shower profiles. 🛠️ Typical applications Private bathroom shower enclosures Replacement of old or porous shower seals Improving the sealing on glass showers Suitable for modern bathrooms with 10 mm glass Renovation and repair Renewal of worn shower profiles Optimization of water drainage in case of leaks Quick solution without extensive remodeling New build and installation Installation in new shower partitions On-site adjustment to individual lengths Clean complement for 10 mm glass thickness Commercial use Use in holiday apartments and guest rooms Practical solution for high-traffic sanitary areas Suitable for regular maintenance and replacement 📐 Technical data Artikelnummer: TYP-18-10 Artikelname: Duschdichtung PVC Ersatzdichtung Dusche Bad TYP-18 200cm Glasstärke 10mm Produkttyp: Cut-to-length Length: 200 cm Glass thickness: 10 mm Material: PVC, rigid and soft combined Profile type: TYP-18 Special feature: With round sealing lip and drip nose Application area: Shower enclosures and glass showers 🔧 Compatibility The shower seal is designed for shower enclosures with 10 mm glass thickness. It is suitable for many common glass showers and profiles where a reliable replacement seal is required. Shower enclosures with 10 mm glass thickness Glass showers with matching TYP-18 profile Shower partitions in the bathroom Replacement for worn shower seals Sanitary areas with glass elements Why buy from Abschlussprofile24? Geprufte Qualitaet Dispatch within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, prepayment Expert advice Mon-Fri 08:00-17:00 Free shipping from €200 Buy now Note:Due to lighting during product photography and different screen settings, the product color may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Bathroom TYP-18 200cm Glass Thickness 6mm
Shower Seal PVC Replacement Seal Shower Bathroom TYP-18 for 6 mm Glass Thickness With this cut-to-size shower seal you can easily choose the desired length and quantity yourself and add everything conveniently to the cart. This saves you cutting work and allows you to process the seal immediately – ideal for quick replacement on your shower. ✅ Your benefits at a glance You receive a precisely fitting replacement seal for shower enclosures with 6 mm glass thickness. The combination of hard and soft PVC provides stable hold and reliable sealing. The additional drip nose supports water drainage and helps to direct splashing water. With the 200 cm length you can flexibly cut the seal to the required size. The cut-to-size format simplifies installation and saves you preparation time. The shower seal is suitable as a practical replacement for worn or leaking profiles. The profile is designed for a clean, functional solution in the bathroom. 🛠️ Typical applications Private bathroom shower enclosures Replacement of worn shower seals Improving the sealing of glass showers Reducing escaping splashing water Renovation and refurbishment Replacement for porous or hardened seals Retrofit for older shower partitions Quick repair without special tools Glass showers and shower partitions Suitable for glass thickness 6 mm Use on straight glass surfaces Supports a clean finishing edge General bathroom applications For functional wet rooms in residential areas Practical for bathroom modernisation Helpful for frequently used showers 📐 Technical data Artikelnummer: TYP-18-6 Artikelname: Duschdichtung PVC Ersatzdichtung Dusche Bad TYP-18 200cm Glasstärke 6mm Produkttyp: Cut-to-size Length: 200 cm Glass thickness: 6 mm Material: PVC, hard and soft combined Profile type: TYP-18 Special feature: With round sealing lip and water-repellent drip nose 🔧 Compatibility This shower seal is designed for shower enclosures and glass partitions with 6 mm glass thickness. It fits particularly well if you are looking for a functional replacement solution for a TYP-18 profile. Shower enclosures with 6 mm glass thickness Glass showers with TYP-18 profile reception Shower partitions made of real glass Bathrooms with straight glass surfaces Replacement for worn PVC sealing profiles Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, prepayment Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the product colour may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Bathroom TYP-18 200cm Glass Thickness 8mm
Shower Seal PVC Replacement Seal for Shower Bathroom TYP-18 for 8 mm Glass Thickness With this cut-to-size shower seal you can easily choose the desired length and quantity yourself and add everything conveniently to the shopping cart. This saves you sawing work and allows you to process the seal immediately – ideal for quickly replacing a seal on your shower. ✅ Your benefits at a glance The shower seal provides reliable sealing between the glass and the shower area and noticeably reduces escaping water. You receive a precisely fitting profile for 8 mm glass thickness that is suitable for many common shower enclosures. The cut-to-size option saves you sawing work and makes further processing particularly easy. The combination of hard and soft PVC supports a stable fit and a flexible sealing effect. The additional drip nose helps to guide water away and keeps the shower area drier. With 200 cm length, the seal can be customized to your measurements. The replacement seal is a practical solution for quick replacement of worn shower profiles. 🛠️ Typical application areas Private bathroom Replacement of an old or porous shower seal Improving the sealing on glass shower enclosures Suitable for renovation and maintenance Shower and shower enclosure Use on glass showers with 8 mm glass thickness Support for side or bottom sealing areas Practical for near-frame and partially framed constructions Refurbishment and spare parts Quick solution for damaged sealing profiles Direct further processing without additional cutting Useful for replacing individual profile sections 📐 Technical data Artikelnummer: TYP-18-8 Artikelname: Duschdichtung PVC Ersatzdichtung Dusche Bad TYP-18 200cm Glasstärke 8mm Produkttyp: Cut-to-size Length: 200 cm Suitable for glass thickness: 8 mm Material: PVC, combination of hard and soft Profile type: TYP-18 Special feature: With rounded sealing lip and water-repellent drip nose 🔧 Compatibility The shower seal is suitable for many glass showers with 8 mm glass thickness. Please check the glass thickness and the shape of the existing profile before purchase so that the replacement seal fits optimally. Glass showers with 8 mm glass thickness Shower enclosures with matching TYP-18 profile Frameless or partially framed glass showers Replacement for worn or hardened shower seals Bathroom shower areas with straight glass mounting Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, prepayment Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different display settings, the color of the product may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Cabin TYP-22 200cm Glass Thickness 10mm
Shower Seal PVC Replacement Seal for Shower Cabin TYP-22 200cm for 10mm Glass Thickness With this shower seal supplied to length, you can conveniently choose the desired length and quantity yourself and add it directly to the shopping cart. This saves you from sawing yourself and allows the replacement seal to be used immediately for further processing. The Shower Seal PVC Replacement Seal Shower Cabin TYP-22 200cm Glass Thickness 10mm is designed for a clean, precise renewal of your shower cabin. ✅ Your advantages at a glance You receive a replacement seal developed for reliable sealing on the shower cabin. The cut-to-length option lets you freely choose length and quantity directly during the order process. You save time because no sawing or elaborate reworking is required. The profile can be easily further processed and adapted to your installation situation. The combination of hard and soft PVC supports a stable fit and flexible sealing performance. At 200 cm length, the profile is ideal for many common shower applications. The version for 10 mm glass thickness is matched to the appropriate glass thicknesses. 🛠️ Typical applications Shower cabins As a replacement seal for existing shower cabins For renewing worn or leaking profiles Glass showers For shower doors with 10 mm glass thickness To improve splash protection in the shower area Renovation and replacement During bathroom renovations If an old seal is brittle, discolored, or damaged Installation and adjustment For custom cuts to the required length For direct further processing without your own sawing 📐 Technical data Artikelnummer: TYP-22-10 Artikelname: Duschdichtung PVC Ersatzdichtung Duschkabine Dusche TYP-22 200cm Glasstärke10mm Produkttyp: Cut-to-length Profiltyp: TYP-22 Length: 200 cm Glass thickness: 10 mm Material: PVC hard/soft combined Application area: Shower cabin, glass shower, replacement seal 🔧 Compatibility This shower seal is designed for matching glass thicknesses and the profile type TYP-22. Please check the existing glass thickness and required profile setup before ordering so that the replacement seal fits optimally. Suitable for 10 mm glass thickness Fits profile type TYP-22 Usable on shower cabins with glass panels Can be used as a replacement for existing shower seals Suitable for applications with 200 cm profile length Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to product photography lighting and different display settings, the product color may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Enclosure TYP-22 200cm Glass Thickness 6mm
Shower Seal PVC Replacement Seal Shower Enclosure TYP-22 200cm for 6 mm Glass Thickness With this shower seal available in custom lengths you can easily select the desired length and quantity and add it directly to the cart. This saves you sawing work and allows immediate further processing — ideal for quick replacement on your shower enclosure. ✅ Your benefits at a glance The shower seal provides a neat finish at the glass surface and supports reliable sealing in the shower area. With the custom cut you can flexibly choose the required amount and order the item without detours. The profile is designed for 6 mm glass thickness and therefore fits many common shower enclosures and glass elements. The combination of hard and soft PVC ensures a secure fit and a functional sealing lip. With a length of 200 cm you receive enough material for individual cutting and direct installation. You save time during processing because no additional sawing on site is required. The replacement seal is ideal for quickly replacing worn or leaking shower profiles. 🛠️ Typical areas of use Private bathroom Replacement of an old or brittle shower seal Improving the sealing of the shower enclosure Retrofit during renovation or modernization Sanitary and installation sector Use for repair of glass showers Suitable solution for on-site cutting Practical for quick repairs in the bathroom House, apartment and guest WC For shower areas with 6 mm glass thickness Suitable for various enclosure shapes Helpful for dripping or inadequately closing shower seals 📐 Technical data Artikelnummer: TYP-22-6 Artikelname: Duschdichtung PVC Ersatzdichtung Duschkabine Dusche TYP-22 200cm Glasstärke 6mm Produkttyp: Zuschnitt Profiltyp: TYP-22 Länge: 200 cm Glasstärke: 6 mm Material: PVC, combination of hard and soft PVC Einsatzbereich: Shower enclosure, shower, glass seal Farbe: Transparent / typical material color Verarbeitung: Suitable for individual cutting 🔧 Compatibility This shower seal is designed for applications with 6 mm glass thickness and fits many common shower enclosures with profile type TYP-22. Please always check the glass thickness and required profile shape before installation. Glass thickness 6 mm Profile type TYP-22 Shower enclosures with matching glass accommodation Glass showers in bathroom areas Replacement for worn shower seals Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Dispatch within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note: Due to lighting conditions during product photography and different display settings, the product color may not be reproduced authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Enclosure TYP-22 200cm Glass Thickness 8mm
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-22 for 8 mm Glass Thickness With this shower seal in profile type TYP-22 you can freely choose the desired length and quantity and conveniently add them to the shopping cart. The cut-to-length saves you sawing work and allows direct further processing, so you can complete your project faster and cleaner. ✅ Your benefits at a glance The shower seal provides reliable sealing at the shower enclosure and reduces splashing in the bathroom. With the cut-to-length option you can select the required length and order it directly. The profile is designed for 8 mm glass thickness and is therefore ideal for many common shower enclosures. The combination of hard and soft PVC supports a secure fit and a flexible sealing lip. With 200 cm length you receive sufficient material for individual adjustments and neat results. The replacement seal is intended for direct further processing and saves you additional steps. 🛠️ Typical applications Shower enclosures As a replacement seal for existing shower enclosures For sliding and hinge doors with matching glass thickness To improve sealing against splashing water Bathroom renovation When replacing worn shower seals For modernizing shower partitions To optimize function and appearance in the bathroom Installation and cutting For individual length adjustments on site For direct further processing without elaborate preparation For craftsmen and DIYers with precise requirements 📐 Technical data Artikelnummer: TYP-22-8 Artikelname: Duschdichtung PVC Ersatzdichtung Duschkabine Dusche TYP-22 200cm Glasstärke 8mm Profile type: TYP-22 Length: 200 cm Glass thickness: 8 mm Material: PVC hard/soft combination Product type: Cut-to-length Category: Accessories 🔧 Compatibility The shower seal is designed for shower enclosures with 8 mm glass thickness and fits particularly well with profiles and partitions in the TYP-22 system. Please always check your shower's glass thickness and installation situation before ordering. Shower enclosures with 8 mm glass thickness Shower partitions with profile type TYP-22 Sliding shower doors with matching groove receptacle Hinged doors and side panels with compatible glass thickness Replacement needs for existing PVC shower seals Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, prepayment Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the product color may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 10mm Rubber Lip 10mm
Shower Seal PVC Replacement Seal TYP-4 for 10 mm Glass Thickness With this shower seal PVC replacement seal TYP-4 you can freely choose the desired length and quantity and conveniently add them to the shopping cart. The cut-to-length option saves you sawing work and enables direct further processing, so you quickly get the right seal for your shower. ✅ Your advantages at a glance You receive a precisely fitting replacement seal for shower enclosures with 10 mm glass thickness. The cut-to-length saves you trimming and makes direct installation easier. The combination of rigid PVC and soft sealing lip provides secure hold and reliable sealing. With 200 cm length the profile can be flexibly adapted to your installation situation. The rubber lip supports a clean finish and helps keep splash water inside the shower area. The profile is ideal for replacing an existing shower seal. You can conveniently order the required quantity according to your needs. 🛠️ Typical applications Shower enclosures and shower doors As a replacement seal for glass showers with 10 mm glass thickness Suitable for pivoting or fixed shower doors To reduce splash water in the shower area Renovation and replacement When replacing worn or hardened seals For quick bathroom repairs without special tools Ideal when only the sealing profile needs to be renewed Private homes and renovations For bathroom modernizations During modifications to existing shower partitions For DIYers seeking a clean and functional solution Commercial and rental properties For apartments with frequently used showers For maintenance in holiday apartments or guest rooms For a neat and practical sealing solution 📐 Technical data Artikelnummer: TYP-4-10-10 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 10mm Gummilippe 10mm Produkttyp: Cut-to-length Length: 200 cm Glass thickness: 10 mm Sealing lip: 10 mm Material: PVC hard and soft Application area: Shower enclosure / shower door Color: Transparent / profile dependent 🔧 Compatibility This shower seal is designed for many common glass showers with the matching material thickness. Please check your glass thickness and the shape of your existing seal before purchase to ensure the profile fits optimally. Shower enclosures with 10 mm glass thickness Glass shower doors with matching profile dimensions Pivot and hinged doors in the shower area Fixed glass elements with sealing profile groove Existing TYP-4-compatible shower profiles Why buy from Abschlussprofile24? Geprufte Qualitaet Shipping within 1-2 business days 4.9 stars from over 25,000 reviews PayPal, credit card, bank transfer Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting during product photography and different screen settings, the product color may not be reproduced authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 10mm Rubber Lip 15mm
Shower seal PVC replacement TYP-4 for 10 mm glass thickness with 15 mm rubber lip With this shower seal PVC replacement TYP-4 you can freely choose the desired length and quantity and conveniently add it to the shopping cart. The cut-to-size saves you from sawing yourself and allows immediate further processing so you can install the seal quickly and accurately. ✅ Your benefits at a glance You receive a precisely fitting replacement seal for shower enclosures with 10 mm glass thickness. The 15 mm rubber lip provides reliable sealing in daily use. The 200 cm length can be flexibly adapted to the required length. You save time-consuming DIY work and can process the seal directly. The combination of hard and soft PVC supports stability and sealing performance. The shower seal is ideal as a replacement for worn or damaged profiles. 🛠️ Typical applications Shower enclosures As a replacement seal for frameless or partially framed glass showers For sealing door and side areas Bathroom renovation To replace old, brittle or leaky shower profiles For quick repairs without fully replacing the shower enclosure Installation and cutting For individual adjustment to the required installation length For immediate further processing after cutting General spare part supply As practical accessory for repair and maintenance For households, landlords and tradespeople 📐 Technical data Article number: TYP-4-10-15 Product name: Shower Seal PVC Replacement TYP-4 200cm Glass Thickness 10mm Rubber Lip 15mm Product type: Cut-to-size Length: 200 cm Glass thickness: 10 mm Sealing lip: 15 mm Material: Rigid PVC and soft PVC Color: Transparent / clear Use: Replacement seal for shower enclosures 🔧 Compatibility This shower seal is designed for matching glass thicknesses and profile requirements. Please check the dimensions of your existing shower enclosure before purchase to ensure the replacement seal fits optimally. Suitable for 10 mm glass thickness Fits shower enclosures requiring a 15 mm sealing lip Can be used as a replacement for TYP-4 profiles Compatible with shower glass in the corresponding profile groove Suitable for individually shortened installation lengths Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, bank transfer Expert advice Mon-Fri 08:00-17:00 Free shipping from €200 Buy now Note:Due to lighting during product photography and different screen settings, the product color may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 10mm Rubber Lip 20mm
Shower seal PVC replacement seal TYP-4 for 10 mm glass thickness with 20 mm rubber lip With this shower seal PVC replacement seal TYP-4 you can choose the desired length and quantity and conveniently add it to your cart. The cut-to-length saves you sawing work and allows direct further processing, so you quickly get the right seal for your shower. ✅ Your advantages at a glance You receive a precisely fitting shower seal for glass with 10 mm thickness and a 20 mm rubber lip. The cut-to-length can be easily adjusted to the length you need, saving you extra work. The combination of hard and soft PVC supports reliable sealing in daily use. The replacement seal is ideal when an existing shower seal is worn or leaking. The clear profile shape allows simple installation and direct further processing. With a length of 200 cm the profile provides enough material for many common shower solutions. 🛠️ Typical applications Shower enclosures For frameless or partly framed glass showers As a replacement for leaking door or side edges Bathroom renovation For replacing old or brittle seals For quick repairs without custom fabrication Installation and service For tradespeople and installers in the sanitary sector For direct processing on the construction site Private households For optimizing sealing in the bathroom For DIY projects around showers and glass partitions 📐 Technical data Artikelnummer: TYP-4-10-20 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 10mm Gummilippe 20mm Product type: Cut-to-length Profile type: TYP-4 Length: 200 cm Glass thickness: 10 mm Rubber lip: 20 mm Material: PVC hard/soft Category: Accessories 🔧 Compatibility This shower seal is designed for matching glass thicknesses and profile applications in the shower area. It is particularly suitable as a replacement for compatible TYP-4 profiles with 10 mm glass acceptance and a 20 mm sealing lip. Shower glass with 10 mm glass thickness TYP-4 shower profiles Replacement for worn shower seals Glass partitions in bathrooms with matching profile reception Shower enclosures with 20 mm rubber lip Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 business days 4.9 stars from over 25,000 reviews PayPal, credit card, bank transfer Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting during product photography and different screen settings, the color of the product may not be reproduced accurately.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 10mm Rubber Lip 28mm
Shower seal PVC replacement seal TYP-4 for 10mm glass thickness with 28mm rubber lip With this cut-to-size you can choose the desired length and quantity freely and add it directly to the cart. This saves you cutting work and gives you a shower seal that you can process immediately and install precisely. The shower seal PVC replacement seal TYP-4 200cm glass thickness 10mm rubber lip 28mm is thus the practical solution for quick replacement in the shower area. ✅ Your benefits at a glance You receive a shower seal for 10 mm glass thickness with a matching 28 mm rubber lip for reliable sealing. The cut-to-size allows you to freely choose length and quantity so you can order exactly as needed. You save the tedious on-site cutting and can process the profile directly. The combination of rigid and soft PVC provides stability on the glass and flexible sealing performance in everyday use. The replacement seal supports a clean finish and helps reduce splash water in the shower area. With a length of 200 cm, the profile is versatile and can be adjusted individually if required. 🛠️ Typical applications Shower enclosures As a replacement seal for glass showers with 10 mm glass thickness For replacing worn or leaking shower profiles Renovation and repair For quick restoration in the bathroom without extensive rework For modernizations where an exact-fitting seal is required Private households For level-access or classic shower solutions in the bathroom Ideal when you need a robust and easy-to-process replacement seal Installation and cutting For individual adjustments to the required installation situation Suitable for direct further processing after cutting 📐 Technical data Artikelnummer: TYP-4-10-28 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 10mm Gummilippe 28mm Produkttyp: Cut-to-size Length: 200 cm Glass thickness: 10 mm Seal lip length: 28 mm Material: PVC Design: Rigid PVC and soft PVC Category: Accessories 🔧 Compatibility This replacement seal is designed for shower solutions with 10 mm glass thickness and is suitable as a matching profile for various glass showers and shower enclosures. Pay attention to the glass thickness and the required seal lip length so that the seal fits optimally. Glass showers with 10 mm glass thickness Shower enclosures with matching profile reception Replacement for worn shower seals in TYP-4 format Shower profiles with 28 mm rubber lip Individually cut installation situations in the bathroom Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, prepayment Expert advice Mon-Fri 08-17 Free shipping from 200€ Buy now Note:Due to lighting conditions during product photography and different display settings, the product color may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 4mm Rubber Lip 10mm
Shower seal PVC replacement seal TYP-4 for 4 mm glass thickness With this cut-to-size option you can freely choose the desired length and quantity and conveniently add them to the cart. This saves you cutting work and delivers a shower seal you can process further and fit precisely right away. The shower seal PVC replacement seal TYP-4 200cm glass thickness 4mm rubber lip 10mm is designed to reliably seal glass with a thickness of 4 mm. ✅ Your benefits at a glance You can flexibly select the required length and quantity and order exactly what your project needs. The cut-to-size option saves you cutting work and makes direct further processing particularly easy. The combination of a rigid PVC carrier and a soft rubber lip supports reliable sealing. The shower seal is designed for 4 mm glass thickness and is matched to the appropriate application. With a length of 200 cm you get enough material for many common shower applications. The 10 mm rubber lip ensures a neat finish and helps prevent water leakage. 🛠️ Typical application areas Shower doors and shower enclosures As a replacement seal for compatible glass showers with 4 mm glass thickness For replacing worn or damaged shower profiles Renovation and repair For quick bathroom repairs without major renovations For direct further processing after individual cutting Private homes and rental properties For bathrooms in apartments, houses and holiday rentals A practical solution for dripping or leaking shower areas Installation and adjustment For simple DIY adjustments to existing glass surfaces Suitable when an on-site precise cut is required 📐 Technical data Artikelnummer: TYP-4-4-10 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 4mm Gummilippe 10mm Produkttyp: Cut-to-size Länge: 200 cm Glasstärke: 4 mm Dichtlippe: 10 mm Material: PVC hard/soft Shop: Abschlussprofile24 🔧 Compatibility The shower seal is intended for applications with 4 mm glass thickness. Please check the dimensions of your existing seal and your shower construction before ordering to ensure the cut fits optimally. Glass thickness 4 mm Compatible shower enclosures with PVC profile carrier Shower doors with comparable profile geometry Replacement for existing shower seals with 10 mm rubber lip Adjustable bathroom applications with straight glass mounting Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 business days 4.9 stars from over 25,000 reviews PayPal, credit card, bank transfer Specialist advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to product photography lighting and different screen settings, the product color may not be displayed authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 4mm Rubber Lip 15mm
Shower seal PVC replacement seal TYP-4 for 4mm glass thickness with 15mm rubber lip With this shower seal PVC replacement seal TYP-4 you can choose the desired length and quantity freely and conveniently add them to the cart. The cut saves you from sawing yourself and enables immediate further processing so you can install your shower profile quickly and accurately. ✅ Your benefits at a glance You receive a replacement seal for shower enclosures with 4 mm glass thickness and a 15 mm rubber lip. The cut is 200 cm long and can be customised if required. You save yourself sawing work and can process the profile directly. The combination of hard and soft PVC supports reliable sealing. The shower seal helps to better retain splash water in the shower area. The profile is suitable as a practical replacement solution for many common shower partitions. 🛠️ Typical applications Shower enclosures and shower partitions Replacement for worn or damaged shower seals Suitable for glass thicknesses of 4 mm Supports a clean seal at the glass edge Bathroom renovation and repair Ideal for replacement as part of minor repairs Practical when modernising older shower systems Helps to quickly restore the shower's function Workshop and installation Prepared for cutting to the required length Suitable for immediate further processing on site Useful for installation work on glass and shower profiles 📐 Technical data Article number: TYP-4-4-15 Article name: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 4mm Gummilippe 15mm Product type: Cut Length: 200 cm Glass thickness: 4 mm Sealing lip: 15 mm Material: PVC hard/soft Application area: Shower enclosure / shower partition 🔧 Compatibility This replacement seal is designed for compatible shower profiles with 4 mm glass thickness and a 15 mm rubber lip. Please check the dimensions of your existing shower enclosure before purchase to ensure the profile fits securely and neatly. Shower enclosures with 4 mm glass thickness Shower partitions with matching profile accommodation Replacement for existing PVC shower seals Profiles with 15 mm sealing lip Applications requiring a 200 cm cut Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, advance payment Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the product colour may not be represented accurately.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 4mm Rubber Lip 20mm
Shower Seal PVC Replacement Seal TYP-4 for 4 mm Glass Thickness and 20 mm Rubber Lip With this shower seal PVC replacement seal TYP-4 you can freely choose the desired length and quantity and conveniently add them to the shopping cart. The cut-to-size saves you sawing work and allows direct further processing so you can install your shower profile quickly and accurately. ✅ Your benefits at a glance You receive a cut-to-size shower seal for easy and fast installation. The cut-to-size saves you sawing work and makes further processing much more convenient. The combination of rigid and soft PVC structure supports reliable sealing. With 4 mm glass thickness and a 20 mm rubber lip, the profile is designed for compatible shower enclosures. The replacement seal helps effectively retain splash water in the shower area. You can flexibly select the required length and quantity according to your needs. 🛠️ Typical applications Shower enclosures as a replacement seal for matching glass showers for sealing door and side areas for renovation and replacement of worn profiles Bathrooms to reduce water escape in the shower area for private bathrooms with glass partitions for modernising existing shower systems Installation and repair for quick replacement of defective seals for direct further processing after cutting for DIY and professional repair projects 📐 Technical data Article number: TYP-4-4-20 Article name: Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 4mm Rubber Lip 20mm Product type: Cut-to-size Length: 200 cm Glass thickness: 4 mm Rubber lip: 20 mm Material: Rigid PVC and Soft PVC Color: Transparent / typical for the material Application area: Shower enclosure / glass partition 🔧 Compatibility This shower seal is designed for shower profiles with matching glass thickness and lip geometry. Please check the dimensions of your existing shower enclosure before purchase to ensure the replacement seal fits optimally. Glass thickness 4 mm Shower enclosures with compatible profile fittings Glass partitions in the bathroom Door and side profiles with 20 mm rubber lip Replacement for worn shower seals in TYP-4 format Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 business days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Specialist advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to product photography lighting and different display settings, the product color may not be represented exactly.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 4mm Rubber Lip 28mm
Shower Seal PVC Replacement Seal TYP-4 200cm for 4 mm Glass Thickness with 28 mm Rubber Lip With this cut-to-size you can freely choose the desired length and quantity and conveniently add it to the cart. This saves you sawing work and lets you process the shower seal immediately. The Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 4mm Rubber Lip 28mm is the right solution for a clean seal and quick replacement in the bathroom. ✅ Your benefits at a glance You receive a precisely cut piece for direct further processing without additional sawing work. The combination of hard and soft PVC structure provides stable support and reliable sealing. The 28 mm rubber lip supports effective water guidance and reduces splash water in the shower area. The profile is designed for glass thicknesses of 4 mm and is therefore ideal for compatible shower enclosures. With 200 cm length the profile can be flexibly adapted to your desired dimension. Replacing a worn shower seal is quick and uncomplicated. The material is designed for daily use in the bathroom and built for durability. 🛠️ Typical areas of application Shower enclosures As a replacement seal for compatible glass showers with 4 mm glass thickness For replacing old, porous or leaking shower profiles Bathroom renovation To improve the appearance and function of shower areas For modernizations in private bathrooms or guest bathrooms Sanitary and installation supplies For craftsmen, installers and DIYers with matching profile requirements For quick repair of existing shower partitions Maintenance and repair To replace damaged seals after wear or lime deposits For regular maintenance and repair work on shower systems 📐 Technical data Artikelnummer: TYP-4-4-28 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 4mm Gummilippe 28mm Produkttyp: Cut-to-size Length: 200 cm Glass thickness: 4 mm Sealing lip: 28 mm Material: PVC hard/soft Application area: Shower enclosure / shower partition 🔧 Compatibility This shower seal is designed for compatible shower profiles with 4 mm glass thickness. Please check the dimensions of your existing seal before purchase so that the cut-to-size fits optimally. Shower enclosures with 4 mm glass thickness Glass shower partitions with matching TYP-4 profile Replacement for worn PVC shower seals Shower walls and side walls with suitable profile receptacle Sanitary profiles where a 28 mm rubber lip is required Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the product color may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 6mm Rubber Lip 10mm
Shower seal PVC replacement TYP-4 for 6 mm glass thickness with 10 mm rubber lip With this shower seal PVC replacement TYP-4 you can choose the desired length and quantity and add them conveniently to the cart. The cut-to-length saves you sawing and allows direct further processing so you quickly get the right seal for your shower. ✅ Your benefits at a glance You receive a precisely fitting replacement seal for shower enclosures with 6 mm glass thickness. The 10 mm rubber lip provides reliable sealing at the bottom of the shower. Thanks to the 200 cm cut-to-length, you can adjust the seal individually to the required length. The cut-to-length saves you the tedious sawing and makes installation significantly easier. The combination of hard and soft PVC provides stable guidance and flexible sealing performance. You can quickly replace the seal as a spare part and restore your shower to full function. 🛠️ Typical applications Shower enclosures and shower partitions As a replacement seal for glass showers with 6 mm glass thickness Suitable for frameless or partially framed shower partitions Renovation and replacement To replace worn or leaky shower profiles Ideal if the old lip is brittle, discolored or damaged Custom adjustment For precise trimming to the required installation length Suitable for direct further processing after cutting Bathrooms and wet rooms To improve splash protection at the shower For use in private bathrooms and renovation projects 📐 Technical data Artikelnummer: TYP-4-6-10 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 6mm Gummilippe 10mm Product type: Cut-to-length Length: 200 cm Glass thickness: 6 mm Rubber lip: 10 mm Material: PVC hard/soft combined Color: Transparent / material-typical Adjustment: Can be trimmed individually 🔧 Compatibility This shower seal is designed for 6 mm thick shower glass and is suitable as a replacement for corresponding TYP-4 profiles. Please check the glass thickness and required lip length before purchase to ensure the seal fits optimally. Shower enclosures with 6 mm glass thickness Shower partitions with TYP-4 profile accommodation Glass showers with matching profile geometry Replacement for worn shower seals in wet areas Bathroom renovation and replacement projects Why buy from Abschlussprofile24? Tested quality Dispatch within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, prepayment Expert advice Mon-Fri 08:00-17:00 Free shipping from €200 Buy now Note:Due to lighting during product photography and different screen settings, the product color may not be reproduced authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 6mm Rubber Lip 15mm
Shower seal PVC replacement seal TYP-4 for 6 mm glass thickness with 15 mm rubber lip With this shower seal PVC replacement seal TYP-4 you can choose the desired length and quantity freely and add it conveniently to the cart. The cut-to-length saves you from sawing yourself and enables immediate further processing, so you can fit your shower profile quickly and precisely. ✅ Your benefits at a glance You receive a shower seal as a cut-to-length that you can order directly in the required quantity. The cut-to-length saves you manual trimming and significantly reduces installation effort. With a length of 200 cm the profile is flexibly adaptable and suitable for many shower situations. The combination of hard and soft PVC supports stable guidance and reliable sealing. The 15 mm rubber lip helps to better retain splash water in the shower area. The replacement seal is ideal if you want to replace an existing seal and restore your shower to working order. 🛠️ Typical applications Shower enclosures As a replacement seal for compatible glass showers For narrow and common shower glass with 6 mm thickness Bathroom renovation To replace worn shower profiles For quick repairs without extensive rework Installation and cutting For custom length adjustment on site For direct further processing after cutting Sanitary accessories As functional accessory for shower partitions For private bathrooms, guest WCs and renovation projects 📐 Technical data Artikelnummer: TYP-4-6-15 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 6mm Gummilippe 15mm Produkttyp: Cut-to-length Length: 200 cm Glass thickness: 6 mm Sealing lip: 15 mm Material: Rigid PVC and soft PVC Application: Shower partition / shower Category: Accessories 🔧 Compatibility The shower seal is designed for compatible shower glass and profiles with 6 mm glass thickness. Please check the dimensions of your existing seal and the required assembly before purchasing to ensure the replacement seal fits optimally. Shower glass with 6 mm glass thickness Shower partitions with compatible profile construction Replacement for existing TYP-4 shower seals Sanitary profiles designed for 15 mm sealing lips Bathroom renovation projects with compatible glass guidance Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, bank transfer Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the color of the product may not be reproduced authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 6mm Rubber Lip 20mm
Shower seal PVC replacement seal TYP-4 for 6 mm glass thickness with 20 mm rubber lip With this shower seal PVC replacement seal TYP-4 you can easily select the desired length and quantity and add everything conveniently to the cart. The cut-to-length option saves you sawing and allows direct further processing, so you quickly get the right seal for your shower. ✅ Your benefits at a glance The shower seal is designed for a glass thickness of 6 mm and ensures reliable sealing on the shower enclosure. The 20 mm rubber lip supports a clean water stop and helps keep splash water within the shower area. The cut-to-length option lets you choose the required length and process the item further without additional sawing. The PVC material combines rigid and flexible areas for practical installation and a secure fit. The replacement seal is ideal for quickly replacing a worn or leaking shower seal. With the 200 cm length you get a versatile base for different installation situations and individual adjustments. 🛠️ Typical applications Shower enclosures As a replacement seal for glass showers with 6 mm glass thickness For replacing old, hardened or damaged seals Bathroom renovation For quick repairs during a bathroom remodel To improve the appearance and function of shower partitions Installation and repair For direct cutting to the required installation length For further processing without elaborate preparatory work Private and commercial For households with regularly used showers Also suitable for rentals, holiday apartments or sanitary projects 📐 Technical data Artikelnummer: TYP-4-6-20 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 6mm Gummilippe 20mm Product type: Cut-to-length Length: 200 cm Glass thickness: 6 mm Sealing lip: 20 mm Material: PVC Application area: Shower enclosure / shower partition 🔧 Compatibility The shower seal is designed for compatible shower profiles and glass thicknesses around 6 mm. Check the dimensions of your existing seal before purchase to ensure the replacement seal fits optimally. Suitable for shower glass with 6 mm thickness Fits shower enclosures with the corresponding profile receiving slot Compatible with shower partitions in the bathroom area Usable as a replacement for worn PVC seals Suitable for custom cuts to the required length Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 business days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, bank transfer 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the product color may not be displayed accurately.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 6mm Rubber Lip 28mm
Shower Seal PVC Replacement Seal TYP-4 for 6 mm Glass Thickness with 28 mm Rubber Lip With this shower seal PVC replacement seal TYP-4 you can freely choose the desired length and quantity and conveniently add them to the shopping cart. The cut-to-length saves you sawing work and allows direct further processing, so you can install the seal quickly and precisely. The profile is designed for 6 mm glass thickness and provides reliable sealing in the shower area with the 28 mm rubber lip. ✅ Your advantages at a glance You receive a precisely fitting replacement seal for shower enclosures with 6 mm glass thickness. The cut-to-length lets you choose length and quantity directly during the ordering process. You save sawing work and can process the profile immediately. The 28 mm rubber lip supports clean sealing and reduces splash water. The PVC profile combines stable guidance with flexible sealing performance for everyday use. The 200 cm length gives you enough material for on-site customisation. 🛠️ Typical application areas Shower enclosures As a replacement seal for compatible glass shower enclosures For renewing worn or hardened sealing profiles Bathroom renovation When modernising showers and glass partitions To replace individual profiles without changing the entire enclosure Installation and service For tradespeople and fitters needing cut-to-length material For quick repairs and direct further processing Private use For DIY projects in the bathroom For uncomplicated maintenance at home 📐 Technical data Article number: TYP-4-6-28 Article name: Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 6mm Rubber Lip 28mm Product type: Cut-to-length Length: 200 cm Glass thickness: 6 mm Sealing lip: 28 mm Material: PVC Application area: Shower enclosure / glass partition 🔧 Compatibility This replacement seal is designed for shower profiles and glass partitions with 6 mm glass thickness. Please check the existing profile shape and the required lip length before purchase to ensure the seal fits optimally. Glass thickness 6 mm Shower enclosures with matching TYP-4 profile Glass partitions in the bathroom Replacement for worn shower seals Profiles with 28 mm rubber lip Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions in product photography and different screen settings, the product colour may not be shown authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 8mm Rubber Lip 10mm
Shower seal PVC replacement seal TYP-4 for 8 mm glass thickness with 10 mm rubber lip With this shower seal PVC replacement seal TYP-4 you can freely choose the desired length and quantity and conveniently add it to the cart. The cut-to-length saves you saw work and enables direct further processing so you can fit your shower profile quickly and accurately. ✅ Your benefits at a glance The shower seal PVC replacement seal TYP-4 provides reliable sealing on the shower enclosure and reduces escaping water. With a glass thickness of 8 mm the profile fits many common glass showers and offers a secure hold. The 10 mm rubber lip supports clean water guidance and improves protection against splash water. The 200 cm long profile can be cut to size and is therefore flexibly adaptable to your installation situation. The cut-to-length saves you time because no sawing is required and you can process the profile immediately. The combination of hard and soft PVC is designed for long-lasting use in the bathroom. The replacement seal is ideal if you want to renew an existing shower seal quickly and easily. 🛠️ Typical applications Shower enclosures in the bathroom As a replacement seal for glass showers with 8 mm glass thickness For retrofitting existing shower partitions To improve sealing against splash water Renovation and replacement When replacing worn or brittle shower seals For bathroom renovations with precise profile adjustment When a quick and clean solution without special tools is required Individual adjustment For cuts to the required installation length For direct further processing after cutting For various installation situations around the shower edge 📐 Technical data Artikelnummer: TYP-4-8-10 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 8mm Gummilippe 10mm Product type: Cut-to-length Length: 200 cm Suitable glass thickness: 8 mm Rubber lip: 10 mm Material: PVC, combination of hard and soft Application: Shower enclosure / shower partition 🔧 Compatibility This shower seal is designed for compatible glass showers with 8 mm glass thickness and fits many common shower profiles in the bathroom. Please check the dimensions of your existing seal and the required fit for the glass thickness before purchasing. Shower enclosures with 8 mm glass thickness Glass shower partitions with matching profile reception Replacement for worn PVC shower seals Shower profiles with 10 mm rubber lip Individually trimmed installation situations in the bathroom Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to lighting during product photography and different display settings, the product color may not be shown accurately.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 8mm Rubber Lip 15mm
Shower seal PVC replacement TYP-4 for 8 mm glass thickness with 15 mm rubber lip With this shower seal PVC replacement TYP-4 you can choose the desired length and quantity freely and add them conveniently to the shopping cart. The cut-to-size saves you from sawing yourself and allows immediate further processing, so you quickly get the right sealing for your shower. ✅ Your benefits at a glance You receive a customisable shower seal for a clean and reliable seal. The cut-to-length saves you time because no extensive sawing is required. The combination of hard and soft PVC ensures stable attachment and flexible sealing performance. The rubber lip provides effective protection against splash water in the shower area. You can select the required length to suit your project and process it immediately. The profile is suitable for replacing a worn shower seal in everyday use. Installation is ideal for anyone seeking a practical replacement solution for glass showers. 🛠️ Typical applications Shower doors and glass partitions As a replacement seal for shower enclosures with 8 mm glass thickness For glass-to-seal applications on shower doors To improve sealing on older shower profiles Renovation and replacement To replace worn or brittle seals For quick modernisation of bathroom and shower areas Ideal when a precise replacement solution is required Private households and refurbishment For bathrooms in rental apartments and private homes During renovations, partial modernisations and repairs For users who want an uncomplicated cut-to-size solution 📐 Technical data Article number: TYP-4-8-15 Article name: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 8mm Gummilippe 15mm Product type: Cut-to-size Length: 200 cm Glass thickness: 8 mm Sealing lip: 15 mm Material: PVC hard/soft combined Application area: Shower enclosure / glass shower Category: Accessories 🔧 Compatibility This shower seal is designed for compatible glass thicknesses and profile requirements in the shower area. It is particularly suitable as a replacement solution for common glass showers with 8 mm glass thickness and a required 15 mm rubber lip. Glass thickness 8 mm Shower enclosures with matching TYP-4 profile Glass showers requiring replacement of lower or side seals Shower partitions in bathrooms with comparable profile fittings Renovation and replacement projects in the private sanitary sector Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Technical advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the product colour may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower seal PVC replacement seal TYP-4 200cm glass thickness 8mm rubber lip 20mm
Shower seal PVC replacement seal TYP-4 for 8 mm glass thickness with 20 mm rubber lip With this shower seal PVC replacement seal TYP-4 you can choose the desired length and quantity freely and conveniently add them to the shopping cart. The cut-to-length saves you sawing work and allows immediate further processing so you can install the seal quickly and accurately. ✅ Your advantages at a glance The shower seal PVC replacement seal TYP-4 provides reliable sealing on the shower enclosure. You can flexibly select the required length and quantity and order exactly what you need for your project. The cut-to-length saves you manual trimming and significantly reduces installation effort. The combination of hard and soft PVC supports stable guidance and effective sealing performance. The 20 mm rubber lip effectively retains splash water in the shower area. The seal is designed for 8 mm glass thickness, making it ideal for matching glass elements. Through immediate further processing you can mount the replacement seal quickly and conveniently. 🛠️ Typical applications Shower enclosures and shower partitions As a replacement seal for compatible glass showers For sealing door and side elements To reduce splash water in the bathroom Bathroom renovation and replacement When replacing worn shower seals For modernizing existing shower systems As a practical solution for leaking transitions Installation and cutting For custom length adjustment on site For direct further processing without your own sawing Suitable for professional and DIY applications General sanitary applications For glass partitions in wet areas To optimize sealing and protective functions For projects with 8 mm glass thickness and matching lip 📐 Technical data Artikelnummer: TYP-4-8-20 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 8mm Gummilippe 20mm Product type: Cut-to-length Length: 200 cm Glass thickness: 8 mm Sealing lip: 20 mm Material: Hard PVC and soft PVC Color: Transparent or profile-dependent Application area: Shower enclosure / shower partition 🔧 Compatibility This shower seal is designed for compatible glass elements with 8 mm glass thickness and is suitable for various shower systems with comparable profile acceptance. Please check the dimensions of your existing seal and the glass thickness before ordering so that the replacement seal fits optimally. Shower enclosures with 8 mm glass thickness Shower partitions with compatible profile acceptance Glass elements in wet areas Replacement for worn shower seals Sanitary solutions with 20 mm rubber lip Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note: Due to lighting conditions during product photography and different screen settings, the product color may not be represented authentically.
Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 8mm Rubber Lip 28mm
Shower Seal PVC Replacement Seal TYP-4 200cm for 8mm Glass Thickness with 28mm Rubber Lip With this cut-to-size option you can choose the desired length and quantity and add them directly to the shopping cart. This saves you from cutting yourself and provides a shower seal that you can process further and fit precisely right away. The Shower Seal PVC Replacement Seal TYP-4 200cm Glass Thickness 8mm Rubber Lip 28mm is the practical solution for quick replacement in the bathroom. ✅ Your benefits at a glance You receive a customisable shower seal for clean and reliable sealing. The cut-to-size saves you cutting work and facilitates direct further processing. The combination of hard PVC and a soft sealing area provides secure hold and flexible sealing. With 200 cm length the profile can be easily cut to the size you need. The 28 mm rubber lip supports effective sealing at the shower enclosure. The profile is ideal as a replacement seal for quick and uncomplicated exchange. You benefit from a practical solution for various glass thicknesses in the shower area. 🛠️ Typical applications Shower enclosures in private bathrooms As a replacement seal for existing glass showers For replacing worn or leaky profiles To improve sealing at the shower edge Renovation and refurbishment For modernising older shower partitions During bathroom renovation work When a precisely fitting replacement solution is required Installation and maintenance For tradespeople and DIYers who need cut-to-size material For direct further processing after shortening For quick replacement without complicated adjustments Glass and shower accessories As an accessory for glass thicknesses in the shower area For shower partitions with a matching profile mounting To complement existing sealing systems 📐 Technical data Artikelnummer: TYP-4-8-28 Artikelname: Duschdichtung PVC Ersatzdichtung TYP-4 200cm Glasstärke 8mm Gummilippe 28mm Product type: Cut-to-size Length: 200 cm Glass thickness: 8 mm Sealing lip: 28 mm Material: Rigid PVC and Soft PVC Category: Accessories Shop: Abschlussprofile24 🔧 Compatibility The shower seal is suitable for applications requiring an 8 mm glass thickness and a long 28 mm sealing lip. Please check the dimensions of your existing shower enclosure before purchasing to ensure the profile fits optimally. Glass showers with 8 mm glass thickness Shower partitions with matching profile mounting Replacement for existing TYP-4 shower seals Shower enclosures requiring a 28 mm sealing lip Bathrooms needing a cut-to-size sealing profile Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 business days 4.9 stars from over 25,000 reviews PayPal, credit card, bank transfer Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting during product photography and different screen settings, the product colour may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-6 200cm Glass Thickness 10mm
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-6 for 10mm Glass Thickness With this PVC shower seal replacement TYP-6 you can freely choose the desired length and quantity and conveniently add it to the cart. The cut-to-length saves you any sawing and allows direct further processing so you quickly get the right sealing for your shower enclosure. ✅ Your advantages at a glance You receive a precisely fitting shower seal for 10 mm thick glass, ensuring reliable sealing in the shower area. The cut-to-length is immediately ready for further processing and saves you the effort of trimming with your own tools. The combination of hard and soft PVC provides stability, flexibility and a secure fit on the glass. The additional water-repellent drip nose helps to channel splash water away in a targeted manner. The sealing lip helps to seal the transition between glass and shower area cleanly and functionally. With a length of 200 cm, the profile can be adapted individually to your required installation situation. The replacement seal is ideal if you want to easily replace a worn or leaky shower seal. 🛠️ Typical areas of use Shower enclosures As a replacement seal for glass showers with 10 mm glass thickness To improve sealing on the shower enclosure door For replacing old, hardened or damaged profiles Bathroom and wet areas To reduce splash water in the shower area For modern bathrooms with glass partitions For clean and functional retrofitting in sanitary areas Renovation and maintenance For quick repairs without complex disassembly Ideal for refurbishment work on existing shower systems Practical for direct cutting to the required size Private and commercial use Suitable for private bathrooms Also usable for holiday apartments, guest WCs or rental properties Useful for regular maintenance and spare parts needs 📐 Technical data Artikelnummer: TYP-6-10 Product type: Cut-to-length Product category: Shower seal / replacement seal Length: 200 cm Glass thickness: 10 mm Material: PVC, hard and soft combined Color: Transparent / clear Profile type: TYP-6 Special feature: With sealing lip and water-repellent drip nose Application area: Shower enclosure, glass shower, bathroom 🔧 Compatibility This shower seal is designed for common glass showers with 10 mm glass thickness and fits particularly well with profiles and doors that require a reliable replacement seal. Glass showers with 10 mm glass thickness Shower enclosure doors made of glass Side glass partitions in the shower area Existing TYP-6 profile fittings Replacement for worn PVC shower seals Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, prepayment Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different display settings, the product color may not be reproduced authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Enclosure TYP-6 200cm Glass Thickness 6mm
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-6 for 6 mm Glass Thickness With this shower seal PVC replacement seal TYP-6 you can choose the desired length and quantity freely and conveniently add them to the cart. The cut-to-size saves you sawing and allows immediate further processing so you can seal your shower enclosure quickly and cleanly. ✅ Your benefits at a glance The shower seal provides reliable sealing at the glass edge and reduces escaping splash water. Thanks to the combination of rigid and soft PVC structure, the profile sits securely and seals flexibly at the same time. The integrated sealing lip with drip nose supports controlled water drainage in the shower. You can adjust the 200 cm long seal individually to your dimensions and process it further immediately. The profile is designed for glass thicknesses of 6 mm and is therefore ideal for suitable shower enclosures. Installation is straightforward and allows a quick replacement of the old seal. The material is easy to maintain and well suited for daily use in the bathroom. 🛠️ Typical applications Shower enclosures As a replacement seal for glass shower enclosures For sliding and hinged doors with matching glass thickness Bathroom and wet areas To reduce splash water in the shower area For clean transitions between glass and the wet zone Renovation and replacement To replace worn or brittle shower seals For quick repairs without extensive remodeling 📐 Technical data Item number: TYP-6-6 Product name: Duschdichtung PVC Ersatzdichtung Duschkabine Bad TYP-6 200cm Glasstärke 6mm Product type: Cut-to-size Length: 2000 mm Glass thickness: 6 mm Material: Rigid PVC and soft PVC Sealing lip: approx. 15 mm Feature: With water-repellent drip nose Application: Shower enclosure / glass shower 🔧 Compatibility This shower seal is designed for shower enclosures with 6 mm glass thickness and is suitable for many common glass showers with compatible profile receipt. Glass showers with 6 mm glass thickness Shower enclosures with a vertical glass edge Shower partitions in the bathroom area Replacement for worn PVC shower seals Profiles with a compatible reception for TYP-6 Why buy from Abschlussprofile24? Tested quality Shipping within 1-2 working days 4.9 stars from over 25,000 reviews PayPal, credit card, bank transfer Expert advice Mon-Fri 08-17 Free shipping from €200 Buy now Note:Due to lighting during product photography and different screen settings, the product color may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Enclosure Bath TYP-6 200cm Glass Thickness 8mm
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-6 for 8 mm Glass Thickness With this cut-to-length shower seal you can easily select the desired length and quantity yourself and conveniently add everything to the cart. The cut-to-size option saves you sawing work and allows direct further processing – ideal for quick replacement on the shower enclosure. ✅ Your advantages at a glance You receive a precisely fitting replacement seal for shower enclosures with 8 mm glass thickness. The shower seal can be individually adjusted to the required length. The cut-to-size saves you the hassle of trimming with your own tools. The combination of hard and soft PVC ensures a secure fit and reliable sealing. The additional drip nose supports clean water drainage in the shower area. Installation is straightforward and ideal for quick replacement. With 200 cm length, the seal is suitable for many common shower enclosures. 🛠️ Typical applications Shower enclosures in the bathroom Replacement of worn shower seals Improving the sealing of glass showers Suitable for daily use in family bathrooms Renovation and maintenance Quick replacement for porous or damaged seals Practical solution for modernizations in sanitary areas Neat further processing without additional cutting work Private households and rental properties For bathrooms with regular use Useful for maintenance and retaining the value of the shower Helpful for landlords, property managers and DIY enthusiasts 📐 Technical data Artikelnummer: TYP-6-8 Artikelname: Duschdichtung PVC Ersatzdichtung Duschkabine Bad TYP-6 200cm Glasstärke 8mm Produkttyp: Cut-to-length Length: 2000 mm Glass thickness: 8 mm Material: Hard PVC and soft PVC Sealing lip: 15 mm Special feature: Additional water-repellent drip nose Adjustment: Can be shortened individually 🔧 Compatibility This shower seal is designed for shower enclosures and glass showers with 8 mm glass thickness. It is suitable as a replacement profile for many common applications in the bathroom and can be adjusted to the required length on site. Shower enclosures with 8 mm glass thickness Glass showers with matching TYP-6 profile Replacement for worn or leaky shower seals Sanitary areas with straight or suitably executed glass seating DIY bathroom projects with custom cut-to-length Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, advance payment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the color of the product may not be reproduced authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Enclosure TYP-7 200cm Glass Thickness 10mm
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-7 200cm for 10 mm Glass Thickness With this cut-to-size shower seal you can choose the desired length and quantity freely and conveniently add them to the cart. This saves you cutting work and provides a profile that can be processed further and fitted precisely right away. The shower seal PVC replacement seal for shower enclosure TYP-7 200cm glass thickness 10mm is designed for a clean seal on the shower and can be adjusted individually to your installation situation. ✅ Your benefits at a glance You receive a precisely fitting replacement seal for shower enclosures with 10 mm glass thickness. The cut-to-size option saves you cutting work and simplifies direct further processing. The profile combines hard and soft PVC for secure grip and reliable sealing. The 200 cm length can be adjusted to the installation length you need. You can conveniently select the desired quantity and add it directly to the cart. The shower seal supports a neat appearance and helps reduce splash water in the shower area. 🛠️ Typical applications Shower enclosures Replacement seal for frameless or partly framed shower enclosures Suitable for glass thicknesses of 10 mm Bathroom and wet areas For sealing shower doors and shower screens Helps retain water in the shower area Renovation and replacement Ideal as a replacement profile for worn seals Practical for modernization and maintenance in the bathroom Installation and adjustment For individual cutting to the required length Suitable for direct further processing after cutting 📐 Technical data Artikelnummer: TYP-7-10 Artikelname: Duschdichtung PVC Ersatzdichtung Duschkabine Bad TYP-7 200cm Glasstärke 10mm Produkttyp: Cut-to-size Length: 2000 mm Glass thickness: 10 mm Material: Hard and soft PVC Profile type: TYP-7 Application area: Shower enclosure / Bathroom 🔧 Compatibility This shower seal is designed for shower enclosures with 10 mm glass thickness and is suitable for matching TYP-7 applications. Please check the glass thickness and the profile shape of your existing seal before purchasing to ensure a reliable fit. Shower enclosures with 10 mm glass thickness Shower screens with matching TYP-7 profile receiver Frameless glass showers with suitable sealing profile Partly framed shower doors with compatible profile geometry Replacement for existing PVC shower seals with similar construction Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the product color may not be represented authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Enclosure TYP-7 200cm Glass Thickness 6mm
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-7 for 6 mm Glass Thickness With this shower seal PVC replacement seal for shower enclosure TYP-7 you can freely choose the desired length and quantity and conveniently add them to the shopping cart. The cut-to-length saves you from doing your own sawing and allows immediate further processing, so you quickly get the right solution for your shower enclosure. ✅ Your benefits at a glance You receive a precisely fitting shower seal for 6 mm glass thickness, providing a reliable solution for many shower enclosures. The cut-to-length option lets you choose the required length and quantity directly during the ordering process. You save yourself sawing work and can process the profile immediately after purchase. The combination of hard and soft PVC helps ensure a secure fit and good sealing performance. The 200 cm length gives you enough material for individual adjustments on site. The shower seal is suitable as a replacement seal for exchanging worn or leaky profiles. 🛠️ Typical applications Shower enclosures As a replacement seal for frameless or partially framed shower enclosures For replacing old, brittle, or leaking shower profiles Bathroom and renovation For bathroom renovations for a neat retrofit To improve the watertightness of glass surfaces in the shower area Installation and adjustment For custom cuts to the required installation length For direct further processing without additional sawing 📐 Technical data Artikelnummer: TYP-7-6 Produkttyp: Cut-to-length / Replacement seal Profiltyp: TYP-7 Length: 200 cm Glass thickness: 6 mm Material: Hard and soft PVC Color: Transparent / material-typical Application area: Shower enclosure, bathroom, glass sealing 🔧 Compatibility This shower seal is designed for shower enclosures with a glass thickness of 6 mm and fits many common glass profiles in the bathroom. Please check the exact glass thickness and the profile shape of your existing shower enclosure before purchasing. Suitable for 6 mm glass thickness Fits shower enclosures with TYP-7 profile design Can be used as a replacement seal for worn original profiles Compatible with many glass showers in the bathroom Suitable for custom adjustments by cutting Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 business days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, bank transfer 📞 Expert advice Mon-Fri 08:00-17:00 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the color of the product may not be reproduced authentically.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Cabin Bathroom TYP-7 200cm Glass Thickness 8mm
Shower Seal PVC Replacement Seal for Shower Cabin TYP-7 200cm for 8mm Glass Thickness With this cut-to-length option you can freely choose the desired length and quantity and conveniently add them to the cart. This saves you cutting work and allows immediate further processing. The Shower Seal PVC Replacement Seal for Shower Cabin TYP-7 200cm Glass Thickness 8mm is the right solution for a clean seal on your glass shower. ✅ Your benefits at a glance You can flexibly select the required length and quantity and order exactly what you need for your project. The cut-to-length saves you cutting work and enables direct further processing. The combination of hard and soft PVC ensures a secure fit and reliable watertightness. The shower seal is designed for 8 mm glass thickness and is ideal for many common shower cabins. With a length of 200 cm you receive sufficient material for precise fitting to your shower. The replacement seal supports a clean seal and helps keep splashing water inside the shower area. 🛠️ Typical applications Shower cabins As a replacement seal for existing glass showers For frameless or partially framed shower cabins To improve sealing at the glass edge Bathroom and sanitary For bathroom renovations When replacing worn shower profiles To optimize splash water protection Installation and cutting For custom length adjustments on site For direct further processing after cutting For DIYers and professional installers 📐 Technical data Artikelnummer: TYP-7-8 Product type: Shower seal / replacement seal Profile type: TYP-7 Length: 200 cm Glass thickness: 8 mm Material: Hard and soft PVC Application area: Shower cabin, glass shower, bathroom Color: Transparent / material-typical 🔧 Compatibility The shower seal is designed for glass thicknesses and profile requirements that match the TYP-7 system. It is especially suitable for the following uses and components: 8 mm glass thickness Shower cabins with TYP-7 profile reception Glass showers in the bathroom area Replacement for worn shower seals Individually cut installation sections Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 business days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08:00–17:00 🚚 Free shipping from €200 Buy now Note:Due to product photography lighting and different screen settings, the product color may not be represented accurately.
Content: 2 Meter (€7.49 / 1 Meter)
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-8 90° 200cm Glass Thickness 10mm
Shower Seal PVC Replacement Seal for Shower Enclosure TYP-8 90° for 10 mm Glass Thickness With this shower seal PVC replacement seal for shower enclosure TYP-8 90°, you can easily select the desired length and quantity and add it to your cart. The cut saves you sawing work and allows immediate further processing, so you can quickly achieve the correct sealing for your shower enclosure. ✅ Your benefits at a glance The shower seal provides reliable sealing at 90° glass connections in the shower enclosure. You receive a precisely fitting replacement profile for 10 mm glass thickness for a neat installation. The cut is ready for further processing and saves you additional sawing work. The PVC material is flexible enough for everyday use while remaining stable in operation. The seal supports a clean finish and helps reduce splashing in the shower area. With a length of 200 cm, the profile is versatile and can be adjusted individually if needed. 🛠️ Typical applications Shower enclosures For 90° glass-to-glass connections As a replacement seal for worn or leaking profiles For modern corner showers with 10 mm glass thickness Bathroom renovation To replace old shower seals For visual and functional improvement of the shower Ideal for renovating individual shower partitions Installation and maintenance For quick retrofitting in existing installations Suitable for individual on-site adjustments Practical for trade professionals, installers and DIY projects 📐 Technical data Artikelnummer: TYP-8-GW-90°-10 Artikelname: Duschdichtung PVC Ersatzdichtung Duschkabine TYP-8 90° 200cm Glasstärke 10mm Produkttyp: Cut-to-length Material: PVC Length: 200 cm Glass thickness: 10 mm Angle: 90° Application area: Shower enclosure / Shower partition Category: Accessories 🔧 Compatibility This shower seal is designed for compatible shower enclosures with 10 mm glass thickness and a 90° arrangement. It is especially suitable for glass connections where a neat finish and reliable sealing are required. Shower enclosures with 10 mm glass thickness Corner showers with 90° glass connection Glass-to-glass installations in the shower area Matching replacement profiles for worn shower seals Custom-cut applications in the sanitary sector Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 working days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, bank transfer 📞 Expert advice Mon-Fri 08:00-17:00 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and varying screen settings, the product color may not be represented authentically.
Content: 2 Meter (€10.99 / 1 Meter)
Shower Seal PVC Replacement Seal Shower Enclosure TYP-8 90° 200cm Glass Thickness 6mm
Shower Seal PVC Replacement Seal Shower Enclosure TYP-8 90° for 6 mm Glass Thickness With this cut-to-size option you can freely choose the desired length and quantity and conveniently add them to the shopping cart. This way you receive the shower seal exactly to size, save yourself sawing work and can process the profile directly. The shower seal PVC replacement seal TYP-8 90° is ideal if you are looking for a reliable seal for 6 mm glass thickness. ✅ Your benefits at a glance You receive a precisely fitting shower seal for shower enclosures with 6 mm glass thickness. The cut-to-size option saves you sawing work and makes further processing particularly easy. The PVC profile supports a clean seal at a 90° angle. You can flexibly select the length and quantity according to your needs. The profile is suitable as a replacement seal for many common shower enclosures and glass elements. Due to the robust material design, the seal is suitable for regular use in the bathroom. 🛠️ Typical applications Shower enclosures As a replacement seal for defective or worn shower profiles For corner showers with a 90° connection between the glass elements Bathroom renovation To replace old seals during modernizations For the visual and functional upgrade of shower partitions Glass and sanitary area For glass elements with 6 mm thickness For sealing fixed or movable shower partitions Installation and repair For quick repairs without complex adjustment work Ideal when a cut-to-size profile ready for immediate processing is required 📐 Technical data Article number: TYP-8-GW-90°-6 Article name: Duschdichtung PVC Ersatzdichtung Duschkabine TYP-8 90° 200cm Glasstärke 6mm Product type: Cut-to-size Material: PVC Length: 200 cm Glass thickness: 6 mm Angle: 90° Category: Accessories 🔧 Compatibility This shower seal is designed for matching glass thicknesses and shower enclosures with a 90° arrangement. Please check the measurements and construction of your shower before purchase so that the profile fits optimally. Shower enclosures with 6 mm glass thickness Corner showers with 90° glass connection Shower partitions with a matching PVC sealing profile Replacement for worn or damaged shower seals Glass elements in the bathroom area with suitable profile receptacles Why buy from Abschlussprofile24? ✅ Tested quality 🚚 Shipping within 1-2 business days ⭐ 4.9 stars from over 25,000 reviews 💳 PayPal, credit card, prepayment 📞 Expert advice Mon-Fri 08-17 🚚 Free shipping from €200 Buy now Note:Due to lighting conditions during product photography and different screen settings, the color of the product may not be represented accurately.
Content: 2 Meter (€10.99 / 1 Meter)